Building Outer Wall Mineral Wool Sandwich Panel With Polyurethane Edge Sealing

_0000_1

Application

Building Outer Wall Mineral Wool Sandwich Panel With Polyurethane Edge Sealing have the following characteristics:


Interlaced Double Support Joint

  • Innovative interlaced double support joint enhancing installation efficiency and compactness


Higher Strength & Enhanced Wind Resistance

  • Reduced screw protrusion minimizes the moment applied to the support under identical wind loads

  • Next-generation 3D gasket by Wiskind augments the load-bearing capability of the steel panel at screw points and joint strength


Airtightness & Watertightness

  • Closed-cavity waterproof design serves as an effective rain barrier, preventing water infiltration and optimizing water/airtightness

  • Interlaced joint configuration fosters superior airtightness


Versatile PU Edge Sealing

  • Thermal Insulation: Dense PU foam fills the panel's installation side, effectively hindering heat transfer and enhancing insulation

  • Robust Strength: Reinforces structural and joint integrity, safeguarding against deformation

  • Water Resistance: PU edge sealing tightens air seals, preventing rain penetration and mitigating moisture-induced degradation of core materials. Its low thermal conductivity ensures lasting insulation performance for panels and systems.


  1. Fire Resistance Rating Achieved at A-Class Level, enhancing the comprehensive fire safety of the steel structure building.

  2. Polyurethane Utilized as Dual-Sided Filler, significantly diminishing heat transfer and water infiltration, safeguarding fire-resistant insulation from moisture-induced degradation, thereby ensuring long-lasting fire insulation performance.

  3. High-Capacity Heavy Core Material, optimizing thermal insulation efficiency.

  4. Rigid Polyurethane Foam Reinforcement on Both Edges, bolstering overall structural integrity and preventing mouth deformation.

  5. 90-Degree Rotation of Fire Cotton, aligning cotton fibers perpendicular to the board surface, augmenting compressive and tensile strength by over 50%.

product specifications

Steel outer LayerCommonT(mm)Outer Panel Specs 0.6-0.8(Coated Steel Panel)


Inner Panel Specs 0.4-0.7(Coated Steel Panel)

Common L(mm)≤12,000

Common W(mm)500-1,100

Coating
Insulation CoreCore MaterialHigh-density thermal insulation, fireproof and water-repellent rock wool/Glass Wool

VW (kg/m³)Rock Wool: 120/Glass Wool: ≥64/Pu(Edge sealing):≥38

Thickness(mm)50-150

TC(w/m·k)Rock Wool: s 0.043 / Glass Wool: ≤ 0.042

Fire RatingRock Wool: Class A /Glass Wool: Class A
ProcessProfile2-sided joint-Male-Female Joint, Pu Edge sealing

Production ProcessContinuous Production Process

Surface TextureFlat / Embossed Pattern/ Micro Ripple / V8 RIPPLE
Center Trim Treatment
Metal snap-in Cover Plate


Inquiry Now