Pattern Prepainted Steel Coil

_0000_1

Application

PPGI coil for construction is used for roofing, guttering, sandwich panels, industrial building facades, cold storage panels, and rolling doors. Our steel products are mainly applies in some professions, such as constructions. For the constructions, it mainly used as roofs of some industrial, residential construction to prevent from corrosion. For the light industry, it used to produce outer cover of electrical appliance, chimney, kitchen utensil and corrosion-proved parts of automobiles. And it is also used as storage and transport in farming, animal husbandry, fishery area. 


Paint Coating Thickness



The top finish coating is larger than 20μm to prevent the intrusion of corrosive media. Due to the different anti-corrosion mechanisms of primer and finish coating, not only the total coating thickness should be guaranteed, but also the thickness of primer (>5μm) and finish coating (>15μm).

PVDF pre-painted steel coil requires a thicker coating. It provides a longer service life. The requirements for the backside paint coating depend on the application, and the sandwich panel only requires a layer of primer. The formed steel plate requires two coats. The thickness is at least greater than 10 μm.

Coating thickness: For polyester, the thickness of the primary coating is generally 14um, and the thickness of the secondary coating is generally more than 20um.

Coating color: according to the user's needs to choose (common colors are white gray, aquamarine, ivory, scarlet, orange, dark soybean green, brick red, etc.)


Kinds of Painting


We mainly use PE, SMP, and PVDF three kinds of paint to produce PPGI PPGLCoil.

Coating type: polyester resin (PE), silicone-modified polyester resin (SMP), polyvinylidene fluoride (PVDF) coating performance characteristics and uses: PE board board surface and cut corrosion resistance is high, the life is generally 5-7 months, decorative in general, suitable for steel building roofs, walls and structural components; SMP coating of the color plate corrosion resistance is better than ordinary polyester products, cut corrosion resistance is high, coating life of about 10 months, decorative in general, the coating life of about 10 months, decorative in general, the color plate is better than the ordinary polyester products, cut corrosion resistance is high, the coating life of about 10 months, decorative in general, the coating life of about 10 months. SMP coated color plate has better corrosion resistance than common polyester products, high corrosion resistance against cutting, high coating life time, and general decorative properties, applicable to roof, wall and structural parts for structural buildings, steel windows and automobiles; PVDF color plate has excellent corrosion resistance, coating life time of 15-20 months, and general decorative properties, applicable to roof, wall and structural parts for structural buildings.


Package: 


Each coil to be securely tied with two bands through the eye coil and one circumferential, the contact points of these bands on the coil edge to be protect with edge protectors. Coil then to be properly wrapped with water proof/resistant paper, it then to be properly and completely metal wrapped. And each packed coil to be properly wrapped with band, three-six such band through the eye of coil at about equal distance, and two-four such bands securely tied around belly of coil at about equal distance.



1-Steel coil; 2-Outer peripheral anti-rust paper; 3-Inner core anti-rust paper; 4-Paper inner corner protector; 5-Paper outer corner protector; 6-Plastic sleeve; 7-Outer peripheral corrugated paper; 8-Round corrugated paper protector; 9-Outer peripheral wrapping plate; 10-Inner peripheral protector; 11-Ferrous round corrugated paper protector; 12-Ferrous outer corrugated paper protector; 13-Ferrous inner corrugated paper protector; 14-Peripheral bundling tape; 15-Radial bundling tape; 16-Locking gasket; 17-Locking clips 

_0000_PATTERN PPGI COIL12

_0000_PATTERN PPGI COIL12

Processing2

Processing2

Processing3

Processing3

product specifications

Thickness (mm)

0.11-2.0 mm (±0.02 mm)

Width (mm)

600-1250 mm (±2 mm)

Zinc coating

zinc 20-275 g/sm

Front color coating

Prime : 5 μm + top coating : 7–25 μm

Back color coating

5 –15 μm

Hardness

CQ/ FH/ G 300-G 550 /HRB 60-90 (Soft---full hard)

Coil Diameter (mm)

508,610.

Coil Weight(T)

3-5 tons or As your requirement.

Color

As RAL or as customer’s sample.

Paint

PE,SMP.HDP,PVDF.

Standard

GB/T 12754-2019;

ASTM A 755;
EN 10169;
JIS G 3312

Steel Grade

CGCC TDC51D+Z

Certification

ISO 9001, BV, SGS

Quality control

commercial and structural quality.

Anti-MEK Wiping more than 100 times

Surface Treatment

With plastic film , Chromated, , Matt, Decorate, Sand surface, Highlight.

Color Stone-carving Sheet

It looks like stone carving, full of sense of quality.

Static-resistance Sheet

With resistance on the surface ( 107-108Ω ), it

contains good performance of static-resistance

and is applied in the fields of electricity, sanitation

and food. 

Heat-resistance Sheet

It can reduce surface temperature by 15-20℃.

It's a kind of good construction material for roof making.

 

Chameleon Sheet

It takes on different colors from different angles

and bring a band new sense to the construction-

one material, two colors.

Flossy Sheet

Good touch quality makes you feel touch floss.

Texture Sheet

It features special texture and shines in the sun.

Matt /Wrinkle Sheet

It features solid effect and good quality of anti-scraping, mainly applied in market of volume curtain.

Package

1. Galvanized metal & waterproof paper around the coil.

2. Both ends are covered with disks.

3. Inner and outer protective steel rings on edges.

4. 4*5 metal strapping bands and circumferential bands to make it stable.

Application

Our steel products are mainly applies in some professions, such as Structural use, roofing, corrugated roofing, commercial use, household appliance, industry...

1. Construction: (Outside) workshop, agricultural warehouse, residential precast unit, corrugated roof, wall, rainwater drainage pipe, terrace, retailer booth, roller shutter door

(Inside) door, doorcase, light steel roof structure, folding screen, ceiling, elevator, stairway, vent gutter

2. Household appliance: Refrigerator, washer, switch cabinet, instrument cabinet, air conditioning, micro-wave oven, bread maker

3. Furniture: Central heating slice, lampshade, chifforobe, desk, bed, locker, bookshelf

4. Carrying trade: Exterior decoration of auto and train, clapboard, container, isolation lairage, isolationcoil

5. Others: Writing panel, garbage can, billboard, timekeeper, typewriter, instrument panel, weight sensor, photographic equipment

 

Port of Shipment

Qingdao Port, or Tianjin Xingang port , China.

Date of Delivery

Within 15-20 days after we receive deposit or L/C at sight.

Payment

L/C at sight or T/T.

Transportation

Container /  bulk ship / Train

Supply Ability

50,000MT per month.


Inquiry Now